Protective jacket FIRE MAX 3 IRS blue, NOMEX® NXT

Certified as to EN 469:2020 (highest performance level X2, Y2 and Z2) and 1149-5:2018 and IEC 61482-2:2018 APC2.
This garment is only one part of a combined protective clothing acc. to EN 469!
The firefighter jacket alone fullfills the requirements for visibility according EN 469:2005+ A1:2006 pt. 6.14 + annex B.

Material:

Outer fabric: the outer shell is made of flame- and heat resistant Nomex NXT, 195 g/m², Colour: black blue
Moisture Protection: 3D PTFE-DUO membrane onto Melaminresinfiber/Aramide non-woven carrier 125 g/m²
Safety Thermal Lining: Melaminresinfiber/Aramide nonwoven material with quilted cover layer of mixed aramid/ viskose fabric 180 g/m²

Remarks:

• Comfortable, ergonomic designed protective jacket with high protection and many features
• Arm and jacket seams with moisture blocker made of flame retardant Polyurethan coated aramid, therefore better protection against the penetration and soaking of water (anti-wicking barrier)
• Highly resistant quick open zipper with double cover flap
• With tunnel for installation of and additional belt IRS (integrated rescue system)
• With zipper at the end of jacket to make it easier to install belt
• Ergonomic shaped ellbows and aditional protection made of black coloured, siliconcarbon coated Paraaramide fabric
• Flame protection collar, on the backside to wear up to the helmet bottom, closure with Velcro fastening at the front
• Shoulder area with extra heat protection
• On back side with fleece strip for lettering 38 x 8 cm
• Sleeves width can be adjusted individually due to Velcro
• Sleeves with NOMEX® knitted wristlet with thumb hole
• Two breast pockets for radio
• With two side pockets with flap; under each side pocket flap with ring for attaching gloves
• On inner side of jacket with set up pockets
• With lampholder on front cover
• 15 x 2,5 cm fleece strip above left radio pocket for name strip
• With flap left hand side and right hand side for holding microphone
• Inspection opening with zipper to check status of membrane
• Jacket with 5 cm wide silver and 5 cm (7,5 cm)  wide yellow/silver/yellow refelctive strips
  jacket alone fulfill requirement acc. annex B of EN469:2005  requirements for visibility
• Sleeves and collar with silver reflective braid
• Backside length 85 cm (size 52-54C)

Available sizes: 40-42 to 66-70 each in lengths A (body size 156-164 cm), B (body size 164-172 cm), C (body size 172-180 cm), D (body size 180-188 cm) and E (body size 188-196 cm)

Weight: 1,68 kg (size 48-50C)