Protective jacket FIRE FLEX black blue/red, NOMEX® NXT, EN 469:2020

Certified as to EN 469:2020 (highest performance level X2, Y2 und Z2) and EN 1149-5:2018, IEC 61482-2:2018 APC2 and EN 343:2019 (Level 4 3 R).
This garment is only one part of a combined protective clothing acc. to EN 469!

Material:

• Outer fabric: the outer shell is made of flame- and heat resistant NOMEX® NXT with lang term impregnation, 195 g/m², Colour: black blue/red
• Moisture Protection: 3D PTFE-DUO membrane onto Melaminresinfiber/Aramide non-woven carrier 125 g/m²
• Safety Thermal Lining: Melaminresinfiber/Aramide nonwoven material with quilted cover layer of mixed aramid/ viskose fabric 180 g/m²

Remarks:

• Comfortable, ergonomic designed protective jacket with high protection and many features
• Arm and jacket seams with robust moisture blocker made of flame retardant Polyurethan coated aramid, therefore better protection against the penetration and soaking of water (anti-wicking barrier)
  Breathable 3-Layer anti wicking barrier at the end of sleeves and under front flap
• Highly resistant zipper with quick release function and double cover flap
• Special ergonomically shaped elbows and additional reinforcements made of flame-retardent, silicon-carbon coated paraaramid fabric
• Flame protection collar can be pulled up under the helmet, closure with Velcro fastening at the front
• Shoulder area with comfortable shock and heat protection
• On back side jacket with robust rescue loop made of double layer Nomex belt
• Sleeves width can be adjusted individually due to Velcro
• Sleeves with innovative NOMEX® knitted wristlet with thumb hole
• Radio pockets on both sides with safety closure flap
• With two side pockets with flap; under each side pocket flap with strap with press button for attaching gloves
• Comfortable designed side pockets under patched pocket with lateral zip opening
• Two applied inside pockets
• With practical paded handle pieces on all flaps
• With lampholder on front cover
• 15 x 2.5 cm fleece strip above left radio pocket for attaching a name strip
• Holding loop for manual microphone on left and right side
• Two inspection openings with zipper to check status of membrane on both sides
• Jacket with patched, breathable, segmented yellow/silver/yellow reflective stripes:
  5 cm wide vertically on front side and slightly v-shaped stripes vertical on back side. Stripes 7,5cm wide around torso, surrounding sleeves on forearm and upper arm outside
• Yellow reflective material on front side left and right
• Back side, upper arm and collar with silver reflective braid
• Backside length 85 cm (size 52-54C)

Sizes: 40-42 to 68-70 each in lengths A (body size 156-164 cm), B (body size 164-172 cm), C (body size 172-180 cm), D (body size 180-188 cm) and E (body size 188-196 cm)

Weight: 1.9 kg (size 48-50C)